| Name | Knighton Retractor |
| Lead Time | Lead time advised within 48 hours of order placement. |
| Competitor | ;575555;57-5555;5755-55;575556;57-5556;5755-56;5755-55_5755-56; |
| Specialty | Neuro, Ortho & Spine-Retractors |
| Material Finish | Stainless Steel |
| Grade | Premium Operating Room |
| Units of Measurement | Each |
| Manufacturer | Ophthalmic Zone |
| Sterility | Non-Sterile |
| Usage | Reusable |
Knighton Retractor
35.0 mm x 35.0 mm, maximum spread 4-1/8″ (10.5 cm) Knighton Retractor is ideal for use in some neurosurgical orthopedic procedures. It is most effective in retraction of soft tissue in procedures such as laminectomies or hemilaminectomies. This retractor features 7 sharp prongs on one side as well as large dial for setting at custom widths with a maximum spread of 4 1/8 inches. Additionally this instrument is available with seven sharp prongs on the left or seven sharp prongs on the right making it perfectly built for approaches on either side.
Description
Reviews (0)
Shipping & Delivery
Related products
Adson Cerebellar Retractor
7-1/2" (19.0 cm), 22.0 mm deep Adson Cerebellar Retractor is a specialized instrument that is used in neurosurgical procedures. This tool can be used for retraction of the cerebellum, it is protected from damage by placement of cotton strips. There is a ratcheting mechanism that allows the ring handles to be locked at a certain width and held there. Additionally this retractor is available with either straight or angled arms and either sharp or blunt prongs makes this a highly versatile instrument that can satisfy any particular surgeon preference of patient need.
Adson Dura & Nerve Hook
3.0 mm tip, 8" (20.0 cm) Adson Dura & Nerve Hook is crafted for use in a wide variety or neurosurgical procedures. This hook is a multipurpose instrument that can be used to retract nerves but can also be used to retract the dural layer of the meninges during craniotomies and spinal surgeries. Additionally this instrument is available with either a sharp or blunt tip making it suited for retraction of very delicate tissue matter with the blunt tip or less sensitive tissue with the sharp tip.
Blount Knee Retractor
6.0 mm distal tip, 7" (17.5 cm) Blount Knee Retractor is a specialized instrument that is made for use in arthroplasty surgeries. The long narrow portion of this can be slid above the capsular ligament at the joint. It can also be fit around knee implants and thus is suitable for use in knee revision.
Blount Retractor
10" (25.0 cm)Blount Retractor is a general-purpose retractor that can be used in orthopedic surgeries. It is designed with a very flat design allowing it to effectively retract and evenly distribute the pressure being applied while keeping itself out of the surgical field. Additionally it is made with either a single or a double prong making it a highly versatile instrument that can be satisfy a variety of patient needs and surgeon preferences.
Campbell Nerve Retractor
10.5 mm wide blade, 8-7/8" (22.5 cm) Campbell Nerve Retractor is specially designed for use in neurosurgical and other procedures that require manipulation and retraction of nerves. This retractor features a ribbed handle from which extends a slightly curved neck and a retraction blade. The slightly sloping the neck gives this an ideal contour for use in the spinal surgery or in craniotomies.
Carbon Fiber Radiolucent Lateral Blade
ball snap closure, w/ teeth Carbon Fiber Radiolucent Lateral Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features teeth giving them added hold in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Carbon Fiber Radiolucent Longitudinal Blade
ball snap closure, blunt Carbon Fiber Radiolucent Longitudinal Blade is an added component to be used alongside the cervical retractor for general purpose soft tissue retraction. All six blades are made from stainless steel and a ball snap closure making them a tight fit. Each blade also features a blunt edge preventing any excess tearing or trauma in retraction. They are available in variety of sizes making it possible to find a suitable blade for soft tissue retraction in a number of neurosurgical scenarios and approaches to the spinal cord. Additionally this instrument is radiolucent which allows it to be left in place during x-ray and can be seen through.
Charnley Initial Incision Retractor
standard pattern Charnley Initial Incision Retractor is a unique instrument specifically designed for use in retraction at the beginning of surgical intervention when the first incision is made. An ideal tool for a vase array of neurosurgical procedures because it securely open up the surgical field to give unobstructed access. This retractor set includes a frame, a long blade, short blade as well as a weight on a chain.
Reviews
There are no reviews yet.